USB driver for the Amica Boards, any board with the CP2012 USB-Serial Chip

USB driver for the Lolin Boards, any board with the CH340G USB-Serial Chip

Tool to Upload the first binary to the Nodemcu Chip

Live version of AirWhere - Use this for normal flying - Standard Version - If your confused which one to download - this is the one!

Please keep checking for updates via the AirWhere web interface, AirWhere works well but we are constantly improving and changing functionality. -

Development version of AirWhere - use this for testing under request from us only - do not use for testing or live.

Live version of AirWhere for the ESP32 chip- Use this for normal flying - Standard Version

Please keep checking for updates via the AirWhere web interface, AirWhere works well but we are constantly improving and changing functionality. -

---

Development version of AirWhere - use this for testing under request from us only - do not use for live. To upgrade to the development version you need to erase_flash first ( press the erase flash button on the flashing tool ) and then flash with the v5 partition table, unfortunately due to adding BLE we had to change the entire setup so the web updater will not work. After adding v5 the web updater work with subsequent versions.
If you have soldered on a FLARM or connected serial to a kobo you may need to unsolder RX,TX and D2 to reflash.

Alpha AirWhere Releases - latest binaries. - these are the latest versions in development, these are untested but the very latest code.

---

AirWhere Menu for LK8000

For an airwhere menu system from LK8000 either copy this DEFAULT_MENU.TXT into the _System directory in the LK8000 folder on your system or for a kobo , install the KoboRoot.tgz file into .kobo, the same as when you installed LK8000 and the menu system will automagically appear.

Download the "KoboRoot.tgz" file and place it directly, without unzipping, into the .kobo directory of your KOBO (Note the dot!). Then Reboot the KOBO to enable automatic install to take place
- by Tonino Tarsi / AirWhere -

Download the "KoboRoot.tgz" file and place it directly, without unzipping, into the .kobo directory of your KOBO (Note the dot!). Then Reboot the KOBO to enable automatic install to take place
- by Tonino Tarsi / AirWhere -

- by Tonino Tarsi - Optional - install XCS and LK8000 (as above) and then add this version. Select either XCS or LK8000, this option allows you to run them both side by side. Thanks to Tonino!

- To be used with the ESP Flasher download on this page.

- To be used with the ESP Flasher download on this page.

- To be copied to configuration directory in LK8000.

- Please visit this page for info.

- please download and install as you would the standard LK8000 install - copy to .kobo.

- please download and install as you would the standard LK8000 install - copy to .kobo.

This is the 6.0B version ( current stable ) version only
Use at own risk - to remove - reinstall LK8000.

- please download and install as you would the standard LK8000 install - copy to .kobo.

This is the 6.1J & R version version only
Use at own risk - to remove - reinstall LK8000.

- Add this file to LK8000 or XCSoar to see who you're flying with. Your name and details will now come in LK or XCS. When you register your details on the AirWhere site it's added in here so that you don't have to individually enter any pilot's IDs. For LK8000 add this file into the LK8000/_Configuration directory. For XCSoar, add to the XCSoarData directory.